Grate Retainer
$8.95
A curbless shower drain assembly has a clear sequence: the cup goes in, the gasket seals, the insert seats, the adjuster levels, and then, right at the very end, the grate retainer locks the strainer grate securely in place. It’s the final step in the assembly, and it’s not optional.
VIM Products offers a shower grate retainer that holds your strainer grate where it belongs: flush, secure, and stable, so it doesn’t shift, rattle, or lift under the daily movement of water and foot traffic in a curbless shower. Small part. Critical function. Exactly what you’d expect from a system engineered by tradesmen who’ve seen every failure point up close.
What the Grate Retainer Does
In the VIM Level Entry Shower Systems Drain Assembly, the curbless shower grate retainer sits between the drain body and the strainer grate, locking the grate into position once the assembly is complete. Here’s why that matters in a level entry shower specifically:
- Curbless showers see more foot traffic across the drain: Without a threshold to guide entry, users step directly over the drain area more frequently, putting more lateral pressure on the grate
- A loose grate is a safety hazard: In a barrier free shower designed for accessibility, a grate that shifts or lifts underfoot is exactly the kind of detail that creates a trip or slip risk
- A properly retained grate stays flush with tile: Keeping the finished surface smooth, even, and looking exactly as intended
At 6.75″ × 6.75″ × 0.75″ and just 1 lb, the VIM grate retainer is a low profile, purpose built component that does its job quietly and reliably for the life of the installation.
Engineered for the Original Level Entry Shower System™
The level entry shower grate retainer is designed specifically for the VIM LES Drain Assembly, not a universal fit adapted to work, but a component engineered from the ground up to seat correctly within the system.
That distinction matters because:
- Dimensional precision. The retainer’s 6.75″ footprint is sized to align exactly with the drain cup and grate, ensuring a secure, flush fit without shimming or modification
- System integrity. Every component in the VIM drain assembly was designed to work together, and the retainer is no exception; a generic substitute may not lock as securely or sit as cleanly
- Long term performance. The Original Level Entry Shower System™ has had zero reported waterproofing failures since launching in 2008, and using matched, purpose built components is part of that record
If you need the complete drain assembly in one order, the VIM Drain Kit includes the Grate Retainer along with every other component required to finish the job.
Frequently Asked Questions
Is the Grate Retainer included in the VIM Drain Kit?
Yes. The Retainer is included in the complete VIM Drain Kit. The individual product is for installers who need to order or replace it separately.
Will a generic retainer work in place of the VIM Grate Retainer?
We don’t recommend it. The VIM Grate Retainer is sized and shaped specifically for the LES Drain Assembly. A generic substitute may not seat securely or align correctly with the drain cup and grate.
Does the Grate Retainer require any special tools to install?
The Grate Removal Tool included in the VIM Drain Kit is the recommended tool for both installing and removing the retainer cleanly. It’s also available separately in the Tools, Materials, and Kit Components line.
How do I know if my Grate Retainer needs to be replaced?
If your strainer grate is shifting, lifting, or no longer sitting flush with the tile surface, the retainer may be worn or improperly seated. Contact VIM’s support team for guidance before ordering a replacement.
Finish Strong With the Right Components
Every great curbless shower installation comes down to getting every detail right, including the last one. Explore VIM’s complete line of Level Entry Shower System™ products and everything you need to build a barrier free shower that performs flawlessly from start to finish.
What’s in the Kit?
Grate Retainer for LES Drain Assembly.
| Weight | 1 lbs |
|---|---|
| Dimensions | 6.75 × 6.75 × 0.75 in |
You may also like
Related products
-
Gasket
Price range: $11.95 through $14.95 This product has multiple variants. The options may be chosen on the product page
Complete Your Barrier-Free Bathroom
The Accent Ring is just one piece of a safer, more accessible shower. VIM Products invented the world’s first level-entry shower pan system, and we continue to develop solutions that make beautiful, functional bathrooms possible for everyone.
Ready to explore more?